• <th id="57agq"></th>
  • <em id="57agq"><ruby id="57agq"></ruby></em>
    1. <th id="57agq"></th>
      CONTACT US:400-609-2378
      current location :Home >> Product >> Heat Resistant Coating >> W61-011 High temperature resistant insulating paint
      W61-011 High temperature resistant insulating paint

      W61-011 High temperature resistant insulating paint

      Composition: This paint is made by organic silicon resin, acrylic acid and ethanol.
      Performance: This paint has the advantages of light color, strong adhesion, excellent heat resistance, oil resistance and insulation, and has the characteristics of low temperature drying and rapid drying.
      Application: The paint can be used in circuit board, electronic products and other metal surface requiring insulation, heat resistance and corrosion protection.

      Product specification

      Temperature resistant range Paint film color Coating types Mixing  proportion
      200℃ Black, white, grey, red, yellow, blue, green, aluminum pink, and other colors Finish paint, primer, One-component
      300℃ Black, white, grey, red, yellow, blue, green, aluminum pink, and other colors Finish paint, primer, One-component

      Technical parameters

      Item Index
      Viscosity(painting -4) 20~40s
      Drying time Baking:200℃ 10-20min
      Flexibility ≤2mm
      Adhesion ≤2级
      Impact strength ≥50kg·cm
      Heat resistance(200-300℃ 2h) No foaming, no crack

      Construction method

      1、Base material processing
      The coated base material surface must carry out thorough removal of grease, scale, rust, old coating, and etc., using shot or sand blasting method, to reach Sweden derusting standard Sa2.5 grade and roughness of 30-70μm, manual derusting methods can also be adopted to reach Sweden derusting standard St3 grade and roughness of 30-70μm.
      2、Baking (applicable for one-component paint)

      Product name Baking temperature Holding time
      High temperature resistant insulating paint 180℃ 20min
      200℃ 10min

      3、Construction conditions
      Coating operation shall be performed as soon as possible after the substrate processing, generally not exceeding 8 hours. The substrate surface temperature and environmental temperature are generally no less than 10℃, the surface temperature shall be at least 3℃ higher than the dew point temperature, and the relative humidity of the air shall not exceed 85%.
      4、Coating method
      This coating can use brush coating, airless spraying and auxiliary air spraying method for construction.
      5、Dilution
      Generally the coating shall use the matching thinner to adjust viscosity and cleaning tools.
      6、Coating intervals
      One-component paint can carry out later coating after drying. If it is dry at room temperature, the coating time intervals as follows:

      Substrate temperature 5℃ 20℃ 30℃
      Shortest 48h 24h 16h
      Longest No limit

      在厨房掀起短裙翘起屁股麻麻_oldman70老人tv人禽交_好深好痛好猛好爽视频_videos成熟少妇