• <th id="57agq"></th>
  • <em id="57agq"><ruby id="57agq"></ruby></em>
    1. <th id="57agq"></th>
      CONTACT US:400-609-2378
      current location :Home >> Product >> Heat Resistant Coating >> W61-10 High temperature resistant tableware paint
      W61-10 High temperature resistant tableware paint

      W61-10 High temperature resistant tableware paint

      Composition: It is composed of organic silicon resin, active antirust pigment, penetrating agent, curing agent, additives, etc.
      Performance: This product not only has high temperature resistant performance, but also has excellent weather resistant, corrosion resistant performance. After high temperature treatment, the paint film can make the organic silicon and silicate minerals connect together, so as to protect the base material. This product has improved the poor corrosion resistance ability of former organic silicone coatings under normal temperature, high temperature and washing alternate cooling and heating state.
      Application: The coating can be used in oven, grill, fireplace, brazier and other metal surface requiring high temperature corrosion protection coatings.

      Product specification

      Temperature resistant range Paint film color Coating types Mixing  proportion
      500℃ Black, aluminum pink, metallic pigments Finish paint, primer, One-component
      600℃ Black, aluminum pink, metallic pigments Finish paint, primer, One-component
      700℃ Black, aluminum pink, metallic pigments Finish paint, primer, One-component
      800℃ Black, aluminum pink, metallic pigments Finish paint, primer, One-component

      Technical parameters

      Item Index
      Luster 1-20
      Viscosity(painting -4) 20~40s
      Drying time Baking:220℃ 50min or 280℃ 30min
      Flexibility ≤2mm
      Adhesion ≤2级
      Impact strength ≥50kg·cm
      Heat resistance(500-800℃ 2h) No foaming, no crack
      Salt spray resistance (neutral) (220℃~280℃,Baking)200h

      Construction method

      1、Base material processing
      The coated base material surface must carry out thorough removal of grease, scale, rust, old coating, and etc., using shot or sand blasting method, to reach Sweden derusting standard Sa2.5 grade and roughness of 30-70μm, manual derusting methods can also be adopted to reach Sweden derusting standard St3 grade and roughness of 30-70μm.
      2、Mixture (applicable for two-component paint)
      According to the weight ratio (the label on the product packaging shall prevail).
      When mixing, under the condition of stirring the main agent continuously, slowly pour in curing agent to make it fully ad evenly stirred.
      20 min after curing of the well mixed coating, filter with 60-80mesh screen, and pour into another container for spare use.
      The mixed coating is valid for 3 hours; please arrange the use according to the construction progress.
      3、Baking (applicable for one-component paint)

      Product name Baking temperature Holding time
      High temperature resistant exhaust pipe coating 220℃ 50min
      280℃ 30min

      4、Construction conditions
      Coating operation shall be performed as soon as possible after the substrate processing, generally not exceeding 8 hours. The substrate surface temperature and environmental temperature are generally no less than 10℃, the surface temperature shall be at least 3℃ higher than the dew point temperature, and the relative humidity of the air shall not exceed 85%.
      5、Coating method
      This coating can use brush coating, airless spraying and auxiliary air spraying method for construction.
      6、Dilution
      Generally the coating shall use the matching thinner to adjust viscosity and cleaning tools.
      7、Coating intervals
      One-component paint can carry out later coating after drying.

      在厨房掀起短裙翘起屁股麻麻_oldman70老人tv人禽交_好深好痛好猛好爽视频_videos成熟少妇